Grangers Clothing Care Kit
Designed to take care of all your clothing needs, the Grangers Clothing Care kit cleans your technical gear and helps restore its durable water repellent (DWR) finish so you can get back out there.




- Performance Wash cleans all technical gear, maintaining any existing water repellency
- Performance Repel plus proofs all technical gear, restoring the DWR finish
- Included free sample of Active Wash cleans base layers and maintains wicking performance
- PFC-free
Imported.
Performance Wash: Isotridecanol, ethoxylated: less than 1% C10 alcohol ethoxylate: less than 1%
Performance Repel Plus: 2-methylpentane-2,4-diol: 1-5%
Active Wash: 1-5% alcohol c12-c15 ethoxylated: 1-5% quaternary ammonium compounds, cocoalkylbis (hydroxyethyl) methyl, chlorides: less than 1%
Leave No Trace: Even biodegradable soaps and cleansers shouldn’t be used in a natural water source. To wash yourself, your laundry or your dishes, carry water 200 feet away from streams or lakes and use small amounts of biodegradable soap (a little goes a long way). Then pour wastewater into a cat hole 6 to 8 inches deep.
Best Use | Multisport |
---|---|
Volume | 21.64 fluid ounces |
Sustainability | Contains recycled materials Product meets the bluesign® criteria |
Review this Product
Adding a review will require a valid email for verification
Product works. REI packaging was terrible.
This product works but research the best way to use it before applying. There are some helpful blog posts on the Gore web site. Wash your waterproof garment using the wash, but rinse a minimum of 2x. While damp, spray the waterproofer thoroughly and wipe up the excess. A spray bottle lasted me for one application for one men’s XL shell. So be prepared. Then let the garment air dry. THEN stick in the dryer on low heat for 20 minutes. That helps the waterproofer bond to the garment. With the very tiny amount I had left over, I sprayed down the high abrasion locations like near the zippers and pockets, let air dry and stuck back in the dryer on ultra low for 20 minutes. Sheds water pretty well now. Time will tell how long the coating lasts.