Back to top

Please select a color/color.


  • Tube is 38.5 in. long and works with CamelBak reservoirs and mouthpieces


View all CamelBak Reservoir Accessories

REI membership


Best Use Supply & Repair
Rated 4 out of 5 by from Good replacement part My camelback (>10yrs) stopped delivering water. It took me a little while to figure out that the tube liner had detached, so when I tried to draw on it the liner would pinch shut. I thought I'd probably have to buy a whole new reservoir, but then I saw this part was available. I almost didn't buy it after reading the reviews. My experience was much better. In the store I looked at the instructions, which say: put the ends in hot water to soften them up to get the plastic bits inserted. I just ran the ends under the kitchen hot water, and installation took a couple minutes and was pretty easy. (The instructions also say to use rubbing alcohol [to lubricate it?], which might make it even easier) The tube seems flexible and pliable just like the old one, it's not kinking or giving me any problems. The only drawback is the price, $9 for tubing that can't be worth more than a dollar no matter how exotic. It makes it worth thinking about upgrading to a whole new reservoir. My system is fine otherwise so I think it's worth repairing, but inspect your bladder and connectors, be sure they're not about to fail.
Date published: 2013-06-23
Rated 3 out of 5 by from Replacement tube I am sure this tube works great, but do yourself a favor and go to your local hardware store, buy the 20' length of 3/8" diameter tubing and cut it to the length you need. Bam!! Fixed, and you can customize it to whatever length you need, all for about $5. P.S. Make sure you clean it before drinking.
Date published: 2014-06-12
Rated 5 out of 5 by from Works as advertised I had no problem installing this on my reservoir, which needed to be replaced after a number of years. Just follow the instructions.
Date published: 2015-03-24
Rated 4 out of 5 by from Great for hydration on hikes and other outdoor act The lining on my original tube had started pulling away from the inside of the tube making it impossible to seat the nozzle in the tube. This caused it to leak out of the very end of the tube - right down the front of my chest. The new tube really had to be warmed up in hot water so it could be slipped onto the reservoir and the nozzle, but now that they're on, I'm sure it will work out in the field. This one part saves me from having to buy a whole new reservoir.
Date published: 2016-09-18
Rated 1 out of 5 by from Very difficult to use The tube on my original two-liter Camelbak bladder started breaking down recently (the inner liner was separating from the outer tube), so I bought one of these as a replacement. I wonder if the design of the tubing has changed over the years, because this new tube is much less pliable than the old one. I've followed the instructions for use (e.g., warm the tube with warm water, use rubbing alcohol at the attachment points), but it is nearly impossible both to attach the tube securely to the bladder (i.e., hard to push it on far enough to get a secure fit) and to remove the tube for cleaning once I've jammed it on there. All of the pulling and pushing I have to do makes me think I'm weakening the entire structure. I'm not a weak person by any means, but I seriously tire myself out working with this gear and have to take multiple breaks during the process (both to rest and to calm my frustration). After several episodes, I'm finished, and this bad experience is pushing me to another brand of hydration pack that's easier to work with.
Date published: 2012-01-08
Rated 1 out of 5 by from It is NOT working Bought a new tube, the problem is that te end of the tube is too wide for the valve, it comes off very easily. Hot water, cold water no difference. I can not use it.
Date published: 2017-03-15
Rated 1 out of 5 by from Not Ususal Camelbak quality Replacement hose nothing like original. Very stiff and is not easy to bend. Mostly folds and creases.Very disappointed.
Date published: 2012-02-20
Rated 5 out of 5 by from Great for MSR Miniworks Makes a great intake hose for the filters. Also it doesn't kink easily and is 1/2 the price.
Date published: 2016-08-03
  • y_2017, m_3, d_26, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_812092, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rei-inc
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 45ms
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 140ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;