Back to top

Please select a color/color.

Details

  • Wheel slot accommodates road, mountain, cross, BMX and tandem bike; holds 20mm road tires up to 2.4 in. wide and mountain bike tire sizes 20 - 29 in.
  • Spring-loaded arm holds bike by the tire; 3-point contact locks in front or rear wheel without the risk of scratching rim or spokes
  • Hands free use: simply roll the bike into the wheel slot and the swing arm holds it steady
  • Clip 2 or more Rakk stands together to create a versatile garage storage or retail flow display

Imported.

View all Feedback Sports Bike Storage Racks

REI membership

Specs

Best Use Cycling
Number of Bikes 1
Dimensions (Base) 16 x 13.5 inches
Weight 5 lbs. 15 oz.
Rated 3 out of 5 by from Not for big tires I've used this stand in the past in bike shops and it works great with smaller tires mounted on narrower rims. I've tried my stand with both 2.35" and 2.4" rear tires on Azonic Outlaw and WTB Laserdisc Trail rims. All combinations were just wide enough so that the rear wheel did not easily slide into the slot and between the roller wheel. To get it to fit you must push the rear wheel down into the slot. This is an OK solution but not as easy as it could be. The size issue isn't a shortcoming of the rack per se; but it would be nice to see the manufacturer start making a wider version.
Date published: 2011-02-06
Rated 5 out of 5 by from Just what my bike needed. I was looking for something to hold my bike while it is in the garage. This is perfect, didn't want to spend too much money on a repair stand or even think about hanging it from the ceiling from the wheels. Too much money goes into these road/mountain bikes for it to be just hung from it's wheels. Comes in black, seems sturdy enough for a road bike, holds nicely in place from the rear wheel and when it isn't used you can fold it and hold it in place using built in lock button. Very pleased and I would recommend this. See photos.
Date published: 2013-06-23
Rated 5 out of 5 by from Flawless I always lifted my bike and stored it hanging from the ceiling. Thinking there must be a better way for garage storage during the summer, I purchased this rack. The bike is quite stable; more stable with the rear tire than the front tire in the rack. Easy to take in the car rather than leaning my bike against the car while getting ready for a ride. To inflate tires, simply put the bike in the rack, hold the rack steady with your foot, lift the bike slightly and rotate the tire until the valve stem is in the right position. Should have purchased it earlier.
Date published: 2013-06-12
Rated 5 out of 5 by from Makes bike storage easy! We live in a small loft with very little storage. Our bikes were being propped up by the wall which wasn't very convenient to get at. Plus the bikes were scraping the wall. We wanted something that would have the bikes upright, not requiring mounting on the wall or screwing bolts into the floor, would hold two bikes and wouldn't be prohibitively expensive. This bike rack fits all of our needs. We bought two and they connected easily. They hold the bikes upright and we can get them in and out without difficulty. We are very happy with our purchase!
Date published: 2014-07-18
Rated 4 out of 5 by from Like the concept! But, didn't work for our bikes. Bought 2 Townie 21D EQ bikes. Both have baskets on the front and fenders. Couldn't use the rear wheel to secure due to the fenders. Front does fit and it holds, but due to the length of the bicycles and the extra weight of the baskets on the bikes... It tended to wobble around a bit more than I like. Should work well for shorter or bikes that are not so front heavy. We ended up returning them at the store and I found a great pair of hiking shoes! Win Win :) For the Electra Townies, I ended up replacing the kick stand with a double leg bicycle center stand and that works very well on both. Hope this helps.
Date published: 2017-04-13
Rated 5 out of 5 by from Does exactly what it says. I needed a rack to keep my bike upright, instead of leaning against the wall in my apartment. This rack does just that. To install, you just pull a lever up and it's ready to go right out of the box! Easy to move around, doesn't need to be floor or wall mounted, and keeps your bike secure. Super basic, works as promised, AND it's not leaving any marks on my floors or walls! Great product, decent price, definitely recommended.
Date published: 2013-05-31
Rated 5 out of 5 by from You Won't Find A Better Floor Stand I did not purchase mine at REI because I needed a White one for my place, but if Black works for you, REI is the best place to get it. Every few years a revolutionary product comes along that changes the face of the way we normally do things. This is one of them. I have been using different stands for years, this is the best one. The stand only touches your tire--never the rim, and is so stable you can clean, lube, and adjust your bike on it like I do all the time. It's high quality and light enough to take in the car to ready or clean the bike before/after a race/ride. No need to lean your bike up against your car or other things. I am even considering getting another one just to leave in the car. It fold flat and opens easy and looks professional. It holds the front or rear tire just as well. I really don't see getting any other floor stand--it will take a long time if not never to make improvements on this design. Wish I owned the patent on it. Everyone with a bike at home, office or garage needs one to avoid falls and damage.
Date published: 2012-10-28
Rated 5 out of 5 by from Perfect Floor Stand I did in-depth web research into other various floor stands and read the reviews posted by other REI members who purchased this particular model before actually buying one from the Settlers Ridge location, Pittsburgh PA (great store, excellent staff). Purchased this product to perform mechanical repairs. In addition, this model is effective for simply storing bicycles with varying tire widths. Remove the stand from the box (no assemble required) and pull the Swing Arm for set-up. Then insert the rear bicycle wheel into the wheel cradle and you're complete! Although this model is not a full-scale shop repair stand, it's still very effective and economical for doing repairs as the bicycle remains stable enough within the Wheel Stabilizer of the unit. Product materials are made from a strong grade of aluminum and, if you wish, the pivot clips (which allow multiple stands to be interconnected) can be easily removed from the leg caps with a flat-head screw driver. This model is made in Taiwan as detailed on the packaging/box and not in the USA as detailed in the product Description section by REI. Great product, reasonably priced.
Date published: 2013-04-27
  • y_2017, m_5, d_23, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_US, sid_809718, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_rei-inc
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 42ms
  • REVIEWS, PRODUCT
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 34ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;