Peak Design  Car Vent Mount - Non-Charging

This is a very sturdy mount that was easy to install and works great with my PD case and my Ford F150. The product is 5 stars. HOWEVER, my Pixel 10 Pro will only charge at 1.3W, which BARELY keeps up with battery drain while navigating. After researching and speaking with PD, I'm sure this is a Pixel problem and not a PD problem. It is odd, my Qi1 bedside wireless charger from PD works much better. So Idk.

So disappointing. How could you skip E class (w213) car vent when developing this??? They have solid normal vent grills and this holder hook is too short by few mm. To make it worse it is fragile, the security pin broke at first attempts of reaching the grill. Then it fell into the vents. So much frustration from supposed to be premium product. And it is a properly made item. So strange they made the hook so.

I bought this for my Van, since there’s no where is else to put a phone holder…and this is awesome!! I love how strong the magnet is and how adjustable the holding arm is. This is the BEST phone holder I have ever had..don’t hesitate, but it today!! (Make sure to check if it’ll fit your vehicle vents first)

This is the second time I bought the same product and though very happy with it the first time unfortunately the “hook” coming out of this product to bold it your ventilation is pretty short. Too short and when I turned it out too far (you can’t see that it’s too far out when the hook is inside you ventilator) it wouldn’t go back in. I had to Arjensbreak the stopper that didn’t stop it from coming out too far but did stop it from going back in again. Now it is all bolted to my car and working very nicely. But for a 100 dollar plus object this should have been designed better.

Bought to use in 2023 ford ranger. The vents in this truck are unique, so wasn’t sure if it would work. Turns out it does, fits very well. Wish the magnet was stronger for more stability, otherwise it’s great

I think the product has the right idea, but the execution is bit short. The difference design of air vent of difference cars can be enormous challenge, but the product fell short on just with the normal vent but with angel ( the vent lean a bit backward like this "\" ) so after you extend the arm you support to make the phone face straight up. But it turn out that the bottom part of the phone is tangle with the vent (see photo) It make the phone doesn't face the driver with perfect angel. I hope there could be a solution for this with some additional accessories !

I drive a lot for work and needed a better solution to mount my phone in my car. I love how easy the vent mount was to install and that I'm able to angle it so that it doesn't block the air vents. In the summer, the southern heat is crazy and I don't have to worry about my phone overheating in the winter. I bought the one that charges my phone which is great because I use my maps app all the time along with spotify and some other apps running on my phone. This is great and you have a so many ways you and angle your phone that fits your needs best without blocking your view while driving. Would definitely recommend!

I have gone through multiple higher quality mounts for vehicle vent mounting and this is by far the best. I love the build quality, the way the knobs allow you to finely adjust it, and how it takes up very little space on the dash. It is rock solid and my phone doesn’t move at all! I am currently using their case so not sure if it’s just as strong with another MagSafe case, but with their case it will not fall off no matter how hard I drive. Highly recommended!

The rotating arm isn’t long enough to keep your phone away from the vent. That being said, this is incredibly secure with two mounting points on your vent. The magnet hold for MagSafe phones is incredibly strong, and I haven’t felt like the my phone will ever fall off. The rotating arm not being longer is a big deal though, especially when you live in a state that has colder temps 4-5 months out of the year. Getting a warning that your phone is too hot to charge because the heat from the vent is hitting your phone reduces the usefulness of the mount. I absolutely like the holder, but because the issue of still having my phone covering the vent persist I can’t say that I love it.

I've owned several car mounts in the past, but they each had their own problems (magnet not strong enough, difficult to mount/unmount with one hand, cumbersome to adjust angles, etc.). This car mount, however, solved ALL of those problems, and also fixed issues I didn't know I had. The magnet is strong and my phone sticks to it with confidence. The arm separates the mount from the vent just enough, allowing its arm to freely rotate. The locking system firmly grips the vent and does not rattle. The mount also pivots, allowing you to control the angle at which the phone is mounted. And this can all be done using one hand. It's also built like a tank. Absolute game-changer. Worth every penny.