HydraPak Plug-N-Play Cap
Customize your water setup at camp with this handy screw cap. The HydraPak Plug-N-Play cap converts your HydraPak Seeker water storage bag or bottle into an easy-to-use reservoir or water dispenser.
- 42 mm screw cap allows you to quickly connect a drink tube to your HydraPak Seeker or Flux water bottle for versatile use (Seeker and Flux bottle not included)
- Includes a dirt guard with tether to keep your cap clean
Imported.
View all HydraPak Water Bottle Accessories| Best Use | Camping |
|---|---|
| Material(s) | POM plastic/stainless steel |
| Dimensions | 1.7 inches |
| Weight | 0.6 ounces |
Write a Review
Adding a review will require a valid email for verification
Not Reliable Enough for Backcountry
I took this Plug-and-Play system on a long backpacking trip, because I was persuaded that it (with the Flux bottle) was the best way to gather water and get it through a Sawyer Squeeze filter. I found pretty quickly that the flow is more constricted and slower than a screw-on connection. Then the little plastic click-in locking mechanism failed, which meant that the bottles had to be carefully held together while squeezing water through to keep dirty water from squirting over the clean bottle. The Flux bottles work fine for the gym, but this click-in system is just not sturdy enough to rely upon in the wild.
pretty much mandatory for the seeker bags
Add this cap to a 3 or 4L seeker reservoir, and you've got a really big storage capacity for filtered water. It connects to the hose that my katadyn gravity filter came with, meaning this can be left alone until it's filled up. For the reviewers who don't like the release (twist the ribs) the alternative is what's on the gravity filter, which sticks out and is just begging to get knocked off. Not shown in the pictures, but included, is a plug/lanyard that keeps stuff out of the port and holds the cap on. The plug is pretty neat in that it's too short to make the port leak, so it doesn't need an o-ring.
integrates with Katadyne BeFree gravity filter
works great. The 6L or 10L Katadyne BeFree gravity filter includes a quick disconnect at the end of the filtered water hose that clicks into the Plug-N-Play cap. Filtered water goes right into a HydraPak collapsible water bottle. Great system.
Works Perfect
Perfect solution to pair the Sawyer Squeeze with a hydra pack bladder. Comes with a small retaining band and plug that snaps into the cap just like the 28mm adapter. Clever way to keep the cap attached to the bladder. Quick disconnect seals tight with no leaks. Only complaint is the 28mm adapter is not included.
Add this to you HydraPak water storage
Great upgrade to HydraPak water carriers. Replaced the original cap on my HydraPak 4L water storage container. This significantly reduces spillage and make using it much easier with the Camp Tap. I use the 4L to refill my smaller drink containers while hiking and backpacking on treks.
This is not a CAP and its name is misleading.
Be aware this is not actually a cap .. It is a cap insert. I need to replace the cap around this insert and now I have two and now cap to put them in.
Hydrapak cap
It gives me more option to add tubing on all hydrapak products.