INNO  Tire Hold 1-Bike Hitch Rack

This product is not available.

Just the thing you need to get you out there and riding, the INNO Tire Hold 1-bike hitch rack secures your bike while avoiding contact with the bike frame or fork to prevent damage.

Shop similar products

Features

  • Each tray can carry up to 60 lbs., making it ideal for carbon frames, large size forks and 27.5 in. semi-fat bikes and e-bikes
  • Fits 1.25 in. and 2 in. receivers with an adapter (included)
  • Trays fold when not in use and tilt down to allow trunk access with a lever
  • Includes lock, keys and security cables for both bike hitch and bikes
  • Lightweight aluminum tray
  • No tools required to install
  • INNO offers a limited lifetime warranty on this hitch rack

Imported.

View all INNO Hitch Bike Racks

Technical Specs

Best Use

Cycling

Number of Bikes

1-bike

Max Weight Per Bike (lbs)

60 pounds

Extension Compatible

No

Hitch Receiver (in.)

Fits 1.25 or 2 inches

Bike Compatibility

Electric Bikes

Bike Mounting

Platform

Bike Attachment Point

Wheel

Trunk Access

Loaded Tilt

Integrated Lock

Yes

Weight

30 pounds

Reviews
7 reviews with an average rating of 3.6 out of 5 stars

Ratings Snapshot

Product Rating

5 out of 7 (71%) reviewers recommend this product

Review this Product

Adding a review will require a valid email for verification

Customer Images

Jasw
Rated 4.0 out of 5 stars

Good product with minor issues

2 years ago

Rack assembled easily and is sturdy. Two of the best design elements have issues. The twist to lock hitch pin is a great idea and allows for the threaded rod that cinches up the rack and reduces wobble. However, the pin was too wide to fit the 1/2” hole on my hitch and I had to drill it out to 9/16”. There is also an adjustable stop that aligns the pin hole in the rack with the hitch. Great idea, but if you are using the supplied 2” adapter, it restricts the movement of the stop and the adapter needs to be modified for the stop to work for some hitches. These are not big issues if you have the necessary tools and knowledge but may prevent your using the product straight out of the box.

Yes , I recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?
WASOON
Valley Forge, Pennsylvania
Rated 5.0 out of 5 stars

Load & Lock

4 years ago

Great Device. Get it done quickly and quietly. I bought this in the midst of the virus scare and it was the only one left. I thought, oh heck, but gotta hope it works, for I bought a new vehicle with a hitch mount (don't want to scratch my new Jeep Trailhawk with my old Saris rack that attached directly to my previous Jeep). It works great and the folks from REI put it together, installed it, and instructed me on it's install and removal. Great Service. Buy this product. It works great.

Age:65–74
Yes , I recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?
LeeJ
Boston
Rated 4.0 out of 5 stars

Good looking, easy to use, pretty secure, B+

3 years ago

Took me about 20 minutes to put this together. The instructions are pretty straight forward, and easy to follow. They remind me of Ikea instructions. It can hold many sizes of bike tires, and doesn't touch the bike frame, which is pretty much a 'must have' feature for me. It's super easy to load and secure a bike on the rack, and would really take something catastrophic to have it come out unintentionally. It's fairly light for it's size, which makes taking it off the car when not in use simple to do if you'd like. I use it to transport a mountain bike and a road bike. It does 'bounce' a little with the mountain bike on it, but it doesn't sway at all. This is the reason I gave it 4 stars (I would have done 4.5 if possible). If the bounce wasn't there, it would get 5. In Mike's review, he said the only thing holding the rack to the car is the safety pin, which is incorrect. If you tighten the knob shown in the video starting at the 2:07 mark, that expands the shaft in the receiver, and keeps it from moving around. You then lock the knob to the base, and then the rack can't be removed from the car- unless you break the knob and have a tool to loosen the hex bolt inside the base of the rack. The safety pin is only there in case that knob should loosen somehow- the pin keeps the rack from falling off the car.

Age:45–54
Yes , I recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?
JakeVA
Richmond, VA
Rated 1.0 out of 5 stars

Started to bend after a few uses from weight.

2 years ago

The product was great until i noticed one side sagging after a few months. The right side bent down after maybe 25 miles of local traveling. No one hit it and I never dropped it as the left side is fine. In my photo you can see the right side sags and there is a gap when putting a straight edge across it. It couldn’t handle the weight of a 56lbs emtb (giant trance). I had the single bike model. Will have to trek it to REI to return. Bummer as i loved the design.

No, I do not recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?
AZKG
Queen Creek AZ
Rated 5.0 out of 5 stars

INNO 1 Bike Hitch Rack

2 years ago

I’m glad I decided to go with this hitch rack. It’s lightweight and built tough. Easy to put on and take off. My bike fits perfect and travels securely. I love this bike rack!

Age:35–44
Yes , I recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?
Michael1764
Bradenton FL
Rated 2.0 out of 5 stars

Fatal Flaw Discovered

4 years ago

I purchased the INNO Bike Hitch INH110 but, unfortunately, I am not happy with the purchase. The first thing I noticed when completing an inventory out of the box was that I was missing the six CAP BOLT M8 (instruction description). After contacting the INNO parts service and discovering that they did not have the bolts in stock, I was left with the unenviable task of finding the bolts locally. I asked parts service about simply taking the bolts from another box but was told there were none available. This resulted in me going to my local Home Depot and asking for assistance in allowing me to take various size M8 bolts to the car to determine which would fit the hitch. It turned out to be the M8X1.0X25mm bolt. Assembling the hitch was easy. I then inadvertently discovered that after “correctly” securing the ISP 1068 Safety Pin to the vehicle’s trailer hitch and “correctly” securing the SP 1074 Knob/lock, a fatal flaw was discovered in that I could physically remove the entire INNO bike hitch from the vehicle by simply unlocking the ISP 1068 Safety Pin. This means no manner how I secure the bike to the INNO hitch, a thief can simply undo the ISP 1068 Safety Pin and remove the entire INNO hitch “and” bike without difficulty. Hopefully, I have solved the problem by securing a bike lock cable to the INNO bike hitch and inserting the cable through the vehicle’s hitch post holes. In my opinion, it would have been better if the INNO hitch had a ½" or 5/8" hole to allow a receiver lock bolt to secure the INNO bike hitch to the vehicle. I would not recommend this hitch because of the fatal flaw.

Age:75 or over
No, I do not recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?
Brian
Dry Side of Oregon
Rated 4.0 out of 5 stars

INNO Hitch Rack

2 years ago

Works well for my Mountain Bike. Have not taken on a long backcountry trip yet. That will be the test!

Age:65–74
Yes , I recommend this product

Ease of Use

Difficult to useVery easy to use
Helpful?

Questions & Answers

Loading Questions...