MSW INF-200 AirStream Inflator Head
The MSW INF-200 AirStream inflator head is a minimalist compressed-air inflation device with an easy twist-on/twist-off operation that helps you fix a flat and jump back on your bike in no time.
- Composite body with alloy head; small size fits in your jersey pocket or repair kit
- Integrated rubber plug keeps the cartridge interface clear of grit and grime
- 1 side is threaded for cartridge storage
- Compatible with threaded compressed-air CO2 cartridges; sold separately
Imported.
View all MSW CO2 Bike Pumps| Best Use | Cycling |
|---|---|
| Pump Type | CO2 Inflator |
| Weight | Unavailable |
Review this Product
Adding a review will require a valid email for verification
Most Helpful Favorable Review
Most Helpful Critical Review
Simple and Reliable
Works well on the road without a lot of thought. The green top end is not threaded for Presta, so after opening your Presta valve, it helps to hold the inflator in place while slowly unscrewing the CO2 cartridge to release compressed air. Thankfully, the inflator composite grip does not get cold. You can easily regulate the flow and even stop it by screwing the CO2 cartridge back in. You can easily detach the inflator from your Presta valve when done. Helps to practice ahead of time. The AirStream product instructions were incomplete, but MSW customer support was helpful.
Makes filling tires a breeze
I Recently purchased this to put on my new enduro bike with a bike bag. I usually use a small packable pump and had to use this c02 Head the other day for the first time. It was very simple to use and filled the tire up effortlessly compared to the small hand pumps that I am used to! It packs away nicely since you can attach it to the co2 Head. I would for sure recommend to a friend.
Great CO2 Inflator
I have used this too many times to count. When you ride tubeless in the American Southwest you need a good CO2 cartridge and inflator. This is the bees knees
Better options
It works fine if you plan to use the entire cartridge. If not, the thing doesn’t seal properly so it turns it into a one time use cartridge.
Cool little inflator!
It works great, and I like that I can thread it onto the cartridge on the "non-puncturing" side, so that the two pieces are stored conveniently together. I generally prefer the inflators like this, with no moving parts, valves, or triggers. Just screw it on to puncture the cartridge, then back it out a little to begin inflation. So simple and effective!
plastic threads destroyed right away
Text book example of what not to do, plastic threads can’t stand the strength needed to screw the gas cartridges and rendered it useless. Not so practical when you have a flat in the middle of nowhere and that is the only inflator you have with you..
Deflated
I bought it for a schrader valve the package said it would work. But it did not