Peak Design Car Vent Mount - Charging Qi2
Mount your phone right where you want it—without blocking vent airflow. This Peak Design mount is rugged enough for any kind of driving, off-road included. Offers Qi2 wireless charging.
- Requires a Peak Design Case or Universal Adapter (not included); also works with MagSafe® phones and phone cases (not included)
- Charging may not be possible or optimal when using the Universal Adapter (not included)
- Installs on a wide range of vehicle air vents and doesn't block vent airflow like traditional vent mounts do
- Offers exceptional stability compared to other vent mounts, thanks to a unique clamp connector with 2 points of connection
- Easy to install and remove, this vent mount can be quickly transferred between vehicles
- 360° swivel arm lets you position your phone right where you want it; buttery-smooth ball head is designed by Peak Design tripod engineers and offers viewing angle adjustment
- SlimLink™ mounting system uses powerful magnets and a UV-shielded antislip pad to instantly grab hold of your phone in portrait or landscape orientation
- Grippy silicone mounting pad with Tinuvin 770 UV-stabilizer high-temp neodymium mounting magnets
- Strong and stable enough for off-road driving
- Integrated Qi2 wireless charging technology offers max charging speeds twice as fast as traditional Qi1 wireless chargers
- Provides up to 15W of power for compatible devices with minimal heat generation
- The mount's magnetic connection system ensures perfect charging coil alignment every time for the most consistent and efficient charging experience possible
- Mounting head and swivel arm are constructed with rugged machined and anodized aluminum; they're designed for durability and longevity
- Includes 1 Qi2 charging car vent mount; one 1-meter USB-C to USB-C charging cable; 3 charging cable routing clips
- Materials: machined/anodized aluminum; silicone; neodymium magnets; glass-reinforced nylon blade hook; hardened steel blade clip; silicone overmold ABS plastic knobs
- Dimensions: 2.3 x 2.3 x 0.5 in.
Imported.
View all Peak Design Phone Mounts| Best Use | Travel |
|---|---|
| Weight | 6.4 ounces |
| Sustainability | From a Climate Label Certified brand |
Write a Review
Adding a review will require a valid email for verification
Customer Images
PIXEL 10---BUYER BEWARE
This is a very sturdy mount that was easy to install and works great with my PD case and my Ford F150. The product is 5 stars. HOWEVER, my Pixel 10 Pro will only charge at 1.3W, which BARELY keeps up with battery drain while navigating. After researching and speaking with PD, I'm sure this is a Pixel problem and not a PD problem. It is odd, my Qi1 bedside wireless charger from PD works much better. So Idk.
Not compatible with Mercedes E class (w213)!
So disappointing. How could you skip E class (w213) car vent when developing this??? They have solid normal vent grills and this holder hook is too short by few mm. To make it worse it is fragile, the security pin broke at first attempts of reaching the grill. Then it fell into the vents. So much frustration from supposed to be premium product. And it is a properly made item. So strange they made the hook so.
A must have for your vehicle
I bought this for my Van, since there’s no where is else to put a phone holder…and this is awesome!! I love how strong the magnet is and how adjustable the holding arm is. This is the BEST phone holder I have ever had..don’t hesitate, but it today!! (Make sure to check if it’ll fit your vehicle vents first)
Nice product but with a design flaw.
This is the second time I bought the same product and though very happy with it the first time unfortunately the “hook” coming out of this product to bold it your ventilation is pretty short. Too short and when I turned it out too far (you can’t see that it’s too far out when the hook is inside you ventilator) it wouldn’t go back in. I had to Arjensbreak the stopper that didn’t stop it from coming out too far but did stop it from going back in again. Now it is all bolted to my car and working very nicely. But for a 100 dollar plus object this should have been designed better.
2023+ Ford Ranger fits
Bought to use in 2023 ford ranger. The vents in this truck are unique, so wasn’t sure if it would work. Turns out it does, fits very well. Wish the magnet was stronger for more stability, otherwise it’s great
With the arm could be longer
I think the product has the right idea, but the execution is bit short. The difference design of air vent of difference cars can be enormous challenge, but the product fell short on just with the normal vent but with angel ( the vent lean a bit backward like this "\" ) so after you extend the arm you support to make the phone face straight up. But it turn out that the bottom part of the phone is tangle with the vent (see photo) It make the phone doesn't face the driver with perfect angel. I hope there could be a solution for this with some additional accessories !
It’s a charger, mounted on the vent!
Since the Qi charging pad in my car has been given the nickname ‘Phone Cooker 3000’ I’ve decided to get a mount which charges my phone while also cooling it. And since I already own virtually every PD product in existence, this mount was a no-brainer. The mount is sturdy, doesn’t wobble too much while driving, and the magnet is strong. Especially combined with the Everyday Case from PD. Routing the provided USB-c cable along the dash to neatly tuck it away was easy because PD also adds three little adhesive clips which you can stick on your dash.
Works great!
I drive a lot for work and needed a better solution to mount my phone in my car. I love how easy the vent mount was to install and that I'm able to angle it so that it doesn't block the air vents. In the summer, the southern heat is crazy and I don't have to worry about my phone overheating in the winter. I bought the one that charges my phone which is great because I use my maps app all the time along with spotify and some other apps running on my phone. This is great and you have a so many ways you and angle your phone that fits your needs best without blocking your view while driving. Would definitely recommend!
Best Car Mount for Stability and Small Form Factor
I have gone through multiple higher quality mounts for vehicle vent mounting and this is by far the best. I love the build quality, the way the knobs allow you to finely adjust it, and how it takes up very little space on the dash. It is rock solid and my phone doesn’t move at all! I am currently using their case so not sure if it’s just as strong with another MagSafe case, but with their case it will not fall off no matter how hard I drive. Highly recommended!
Great phone mount with one major flaw!
The rotating arm isn’t long enough to keep your phone away from the vent. That being said, this is incredibly secure with two mounting points on your vent. The magnet hold for MagSafe phones is incredibly strong, and I haven’t felt like the my phone will ever fall off. The rotating arm not being longer is a big deal though, especially when you live in a state that has colder temps 4-5 months out of the year. Getting a warning that your phone is too hot to charge because the heat from the vent is hitting your phone reduces the usefulness of the mount. I absolutely like the holder, but because the issue of still having my phone covering the vent persist I can’t say that I love it.