PNW Components Cascade Dropper Post - 125mm
Built light and short to fit a wide range of bikes, the PNW Components Cascade dropper post delivers 125mm of travel and clean cable routing with fixed entry at the mid cap instead of the post head.



- Ample travel gives you plenty of space above the seat when you're riding down steep, technical sections
- External routing at the mid cap ensures that your cables are kept nice and tidy during actuation
- 2-bolt microadjust head allows precise saddle positioning
- DU bushing prevents seat wobble
- Reliable, sealed coil-spring cartridge is ready to roll for miles to come and is easy to service
- Large-diameter stanchions create a stiff and light post
- Remote lever kit not included
- Covered by the manufacturer's lifetime warranty; see their website for details
Imported.
View all PNW Components Dropper Posts| Best Use | Mountain Biking |
|---|---|
| Seatpost Diameter | 30.9 x 125 MM Travel: 30.9 millimeters 31.6 x 125 MM Travel: 31.6 millimeters |
| Seatpost Length | 30.9 x 125 MM Travel: 400 millimeters 31.6 x 125 MM Travel: 400 millimeters |
| Seatpost Setback | 30.9 x 125 MM Travel: 0 millimeters 31.6 x 125 MM Travel: 0 millimeters |
| Seatpost Travel | 30.9 x 125 MM Travel: 125 millimeters 31.6 x 125 MM Travel: 125 millimeters |
| Cable Routing | External |
| Seatpost Material | Aluminum |
| Weight | 608 grams |
Write a Review
Adding a review will require a valid email for verification
Poor quality - do not buy
This dropper post was bad out of the box. We installed it on a bike that I handed down to my teenage son. The problem was that the release mechanism would not fully return. We confirmed our cable was fine, but it would only return about half way. If we pulled back on the the thumb lever the cable would force the mechanism back, but it would not return on its own. We could not feel any binding, just no spring force pulling it back all the way. And in the semi-returned state, the trigger was loose which is annoying, but also the dropper was on the ragged edge of engaging, so would not hold a person's weight. The problem was noted before we ever tightened the seat clamp, so that also was not the problem. I would consider the possibility that this was a one-off and try to exchange, but the post we were replacing was a Brand-X Ascend II which had failed after about 8 years of minimal use. Why is this relevant? It was clearly the same product branded differently. And I was never all that happy with the Ascend as it just didn't have the raising speed I wanted.
Need help choosing gear?


Join once. Adventure for life.
Start earning an annual Co-op Member Reward* with a $30 lifetime membership!
10%
Earn $17 in rewards on this item
And earn 10% rewards on future eligible purchases*


