Spark R&D T1 Step Locker Splitboard Binding Adapters
Take on diversified terrain with ease from the quick descents to side stepping to skate-splitting. The Spark R&D T1 Step lockers allow you to lock your heels for more effective backcountry travel.
- Simply rotate the levers to locked position, and then step down to lock heels; heels stay locked until you rotate the levers to the unlocked position
- Lockers provide secure fit in both locked and unlocked positions; forward releasable for added safety
- Assembly screws in under the heel rests
Made in USA.
View all Spark R&D Snowboard Binding Accessories| Best Use | Splitboarding |
|---|---|
| Material(s) | Aluminum/nylon |
| Dimensions | 3 x 2 x 0.25 inches |
| Weight | 5.4 ounces |
Review this Product
Adding a review will require a valid email for verification
Customer Images
Heel plate and puck are too close on my board
Bought these the other day, super excited as I’ve heard good things about this model heel lock, i.e. much better than any previous designs etc. But when I went to install them there wasn’t enough space to turn the lever between lock and unlock - my back foot puck was in the way. I have a relatively narrow stance, but nothing crazy considering the holes drilled, board is a Salomon Speedway Split. Just take note of your back pucks and heel plate to make sure you have enough room with your stance setup. Bummed I can’t use these on my board. Obviously this is just in case of a narrower stance, but figured I’d give a heads up
T1 Steplockers won't work for regular stance
I was quite excited to get my T1 steplockers, however after installing them, it looks like there is a flaw. The right one works fine, but the left one doesnt have enough clearance to swing correctly from unlocked to locked (and vice versa). It's blocked by the puck. This was mounted on a Jones Explore with a normal stance width and with 12/-12 angles.
Not worth it :(
I had such high hopes for these. My split skiing is not half bad, but I wanted something to help elevate it to the next level. Problems arose immediately. I have brand new 2024 nitro (spark platform) bindings, on a brand new split, with brand new (2024) t1 lockers. Right off the bat only 1 side of the arm was "locked" on both bindings. The included bolt, with factory loctite (and eventually additional blue loctite) needs to be loose enough to allow the arm movement, but that lead to the bolts backing them selves out every single tour. Plastic slide components gave no confidence. I was so stoked to get these going, then was let down. Please redesign and improve these lockers!