Fox Racing Shox 36 Factory GRIP2 Suspension Fork
This product is not available.
With a revamped crown, the all-mountain Fox Racing Shox 36 Factory suspension fork improves durability without compromising stiffness. A GRIP2 damper makes fine-tuning the suspension easy and precise.
Shop similar products- Updated crown design improves durability while maintaining stiffness, increasing steer-tube overlap at the crown-steerer unit and dropping 20 g of weight
- GRIP2 damper allows for external fine-tuning thanks to its patented Variable Valve Control (VVC) technology which provides high ride quality and precise adjustability
- GRIP2 system adjusts suspension performance with the twist of a knob—no disassembling and reassembling of the fork required
- Lower leg bypass channels allow for increased air volume, reducing the amount of additional unintended pressure ramping
- Lower leg bath oil circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel
- Lower leg bleeders allow for atmospheric pressure equalization, allowing for full travel while increasing responsiveness and sensitivity to small bumps
- Lower leg arch design shaves weight without compromising the stiffness or strength requirements that modern enduro and gravity-style riding demand
- Bolt-on floating Kabolt X axle is lightweight and increases torsional stiffness via a sleeveless, single-sided pinch-bolt design
- Genuine Kashima Coating on upper tubes reduces friction and increases wear life
Imported.
View all Fox Racing Shox Bike Suspension ForksBest Use | Mountain Biking |
---|---|
Fork Spring Type | Air Spring |
Fork Brake Type | Disc Brake |
Fork Brake Mount | Post Mount |
Max Rotor Diameter | 230 millimeters |
Crown Race Diameter | 40 millimeters |
Stanchion Diameter | 36 millimeters |
Steerer Tube Diameter | 1.5 in. Tapered |
Steerer Tube Length | 264 millimeters |
Max Tire Width | 72 millimeters |
Fork Travel | 160 millimeters |
Fork Offset | 44 millimeters |
Front Axle | 15 x 110 mm Thru-Axle (Boost) |
Material(s) | Kashima coated aluminum |