Park Tool PCS 10.3 Deluxe Home Mechanic Bike Repair Stand
The perfect upgrade for your home shop, the full-featured Park Tool PCS 10.3 Deluxe Home Mechanic repair stand offers a stable way to hold nearly any bike for adjustments, cleaning and repair.
This purchase pays for membership!
$27
10% Reward
on this and every eligible full-price item*
+
$30
Bonus Card
valid for 60 days after joining*
=
$57
Value
Keep shopping
- Cam-actuated, micro-adjustable clamp fits tubes and seatposts of any shape and material—including aero and dropper posts—from 7/8 to 3 in. diameter (22 to 76 mm)
- Clamp's cam-actuated design makes for quick one-handed entry/exit, while 360° of rotation allows for positioning all parts of the bike within reach
- Narrow clamping jaws (2.7 in.; 7 cm) fit into tight areas or onto short seatposts
- Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage
- Stand is height adjustable from 39 to 57 in. (99 to 145 cm) using a convenient quick-release lever, thus accommodating any mechanic, whether seated or standing
- An integrated height-adjustable parts tray means your tools and small parts are always within reach
- Accessory ports on the height-adjustment collar make it easy to add a Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (accessories not included)
- All-steel construction and teardrop-shaped tubing ensure maximum rigidity and stability; tubular support braces, locking support yoke and upgraded internals add dependability
- Durable textured powder coat finish
- When open, base forms a triangle of 36 x 36 x 48 in. (92 x 92 x 121 cm) for stability
- Quickly folds down to 45 x 14.5 in. (114 x 37 cm) for storage and transport; smooth-operating leg support system pulls both legs up in one simple motion
- Stand weighs 21 lbs. 6.4 oz. (9.7 kg) and holds up to 80 lbs. (36 kg) for compatibility with most two-wheeled, pedal-driven bikes, including fat-tire bikes and most e-bikes
- Note: This 80 lb. (36 kg) maximum capacity assumes the weight is centered below the clamp and between the legs
Imported.
View all Park Tool Bike Repair Stands| Best Use | Cycling |
|---|---|
| Stand Height | 39-57 inches |
| Weight | 21 lbs. 6.4 oz. |
Review this Product
Adding a review will require a valid email for verification
Customer Images
A solid work stand that everyone should consider.
I have been using this stand for my fleet of bikes and it holds up to just about anything but a 50lb ebike. The stand is solid, with a 360dof jaw which accommodates multiple securing points, a rubber top "bar" for the quick seat post hang, and an adjustable height tool trey, it works for most situations. I was slightly disappointed when learning that it is not directly adaptable with Park Tool's extended tool trey due to the profile of the tubes used. The included parts trey is quite useful but make sure when you install it, it will need to be within 5 or 6 inches of the top clamp, most pedals will hit the trey when a bike is mounted.
Who says it's not portable?
Yes you need to assemble it when it first arrives. Once you do that, this stand is foldable, see photo. This should make it portable enough. The stand design is superior over feedback tripod and makes it much more sturdy, the clamp quick release design is very handy. It could feel heavy depend on your strength, but within the average of bike stand. The lighter version PRS-25 is way more expensive, but only offers 3lbs advantage (13lbs). This stand weighs 16lbs and strikes a great balance and high value. Park tool also told me it is legit for bike wash in case you're wondering, but do make sure no water persist in tube, and remember to lube inside the tube to protect it from moisture. Not recommended for outside storage for long days, you should store this indoor. Side note: yes water does get into tube after bike wash.
Excellent product
I bought this for my fiancee, who is building a gravel bike (and does all the maintenance on our ever-expanding bike fleet.) He had been eyeing this product for awhile and it was a great use of our dividend! He is very happy with it. I asked if there was ANY constructive criticism he had for it and he couldn't come up with anything. It's high quality, doesn't take up a ton of space, and folds down easily and small for storage. Plus, he loves the color.
Solid!
Bought the 10.3 stand a couple days ago and so far have no complaints. Easy to assemble, holds the bike well to work on, and packs down to easily store on a shelf or corner of the garage. Not cheap but I prefer to buy once cry once.
The sweet spot for stability and useful load!
This is the stand to get, especially if you need a stable stand with the bike at odd angles. I compared it to other manufacturers' beefy stands, far more expensive ones, and this one is considerably more stable. Only negative is it's steel, and there's no powder coating inside the tubes. Washing your bike on this stand could cause rust, but a quick spray inside of a rust preventative takes care of that issue.
A "Necessary" Convenience
I'm glad I bought the PCS 10.3 stand. It assembled easily, it's engineered to be strong and stable, and it folds up easily for storage in the corner of my garage. Don't overlook the tool tray because it's somewhat hidden within the packaging inside the box. Using the Park Tool stand is so much more convenient than trying to prop a bike up on patio furniture or other awkward homemade nonsense while trying to perform tuning and maintenance.
Excellent product
This is a high quality product--sturdy and functional. The base with two legs is very sturdy and doesn't tip. It is a much better design than the three leg versions made by other manufacturers. The clamp is easy to adjust and holds securely. The tool tray is too small, but does work to hold small items--screws, hex wrenches and such. It works best for home use, but does fold for easy transport. 100% satisfied with the product--stop shopping and just buy this one...
Money well spent
I used to work on my bike by turning it upside down, but then I hurt my lower back. I tried a much cheaper rear stay bike stand. My bike developed frame/wheel alignment problems after using it a few times. So I threw it away. I am so happy that I got this bike repair stand. It is safe to use on all our bikes and makes bike maintenance and repair so much easier. It is expensive but worth every penny.
Heavy Lifter
I have a heavy e-bike, 65-75 lbs, including metal baskets, rails, 4 inch wide tires. The Park Tool bike stand 10.3 was able to handle all of it. It took my husband to lift it, then I was able to easily clip the bike onto the seat post. The stand and bike was solid. No shaking. I took me decades to buy this stand because of price. It’s worth it.
Truth in advertising?
I was shocked. Shocked I tell you! This stand is excellently designed and made. My monstrously heavy eMTB is no challenge for it. I'm challenged to get it up onto it but that's just me. The assembly instructions, like most, should have been written by a customer but now I'm just nitpicking. I have to say it is an excellent value, too.