COVID-19 UPDATE: Most REI stores are temporarily closed. Visit this FAQ for current details.

How to Replace a Derailleur Hanger

rated 4.5 out of 5 with 14 reviews

This article is part of our series: Drivetrain Maintenance

A detail shot of a bike derailleur hanger

If your derailleur takes a hit during your ride, the derailleur hanger is there to absorb the impact. If the hanger gets damaged or bent, you'll need to replace it.

 

Video: Bike Maintenance: How to Replace a Derailleur Hanger

 

Tools you’ll need:

  • Hex wrench
  • Bike cleaner
  • Bike grease

 

Removing the Derailleur Hanger

Derailleur hanger dropouts on a bike frameStart by taking the rear wheel off your bike. 

Next, use the hex wrench to loosen and remove the bolt that connects the derailleur to the hanger. It's fine to let the derailleur dangle from the shift cable while you work. 

Now remove the hanger insert from the dropouts on the frame with a hex wrench. Some hangers will have two halves to remove. 

 

Installing the Derailleur Hanger

Close up shot of a man installing a new derailleur hanger on a bikeBefore installing the replacement hanger, clean off the dropout area with bike cleaner and a rag. Then lubricate both the inside and outside of the frame with bike grease.

Now you can install the new hanger and tighten it into place using a hex wrench.

Grease up the threads on the derailleur mounting bolt and reconnect the derailleur. Use a torque wrench to tighten the bolt to the manufacturer's specified torque.

Now reinstall the rear wheel and make sure the gears are shifting normally. 


How helpful was this article? Click a star to rate.